The fiber-fed preslit of GIANO at T.N.G

Abstract

Giano is a Cryogenic Spectrograph located in T.N.G. (Spain) and commisioned in 2013. It works in the range 950-2500 nm with a resolving power of 50000. This instrument was designed and built for direct feeding from the telescope [2]. However, due to constraints imposed on the telescope interfacing during the pre-commissioning phase, it had to be positioned on the rotating building, far from the telescope focus. Therefore, a new interface to the telescope, based on IR-transmitting ZBLAN fibers with 85μm core, was developed.Originally designed to work directly at the $f/11$ nasmyth focus of the telescope, in 2011 it has decided to use a fiber to feed it. The beam from the telescope is focused on a double fiber boundle by a Preslit Optical Bench attached to the Nasmith A interface of the telescope. This Optical Bench contains the fiber feeding system and other important features as a guiding system, a fiber viewer, a fiber feed calibration lamp and a nodding facility between the two fibers. The use of two fibers allow us to have in the echellogram two spectrograms side by side in the same acquisition: one of the star and the other of the sky or simultaneously to have the star and a calibration lamp. Before entering the cryostat the light from the fiber is collectd by a second Preslit Optical Bench attached directly to the Giano cryostat: on this bench the correct f-number to illuminate the cold stop is generated and on the same bench is placed an image slicer to increase the efficiency of the system.

21 pages, 24 figures, 3 tables. Presented at SPIE Astronomical Telescope + Instrumentation 2014 (Ground-based and Airbone Instrumentation for Astronomy 5, 9147-360). To be published in Proceeding of SPIE Volume 9147